| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
1 |
Perforated strip | 12 ½" | ||
1a |
Perforated strip | 9 ½" | ||
1b |
Perforated strip | 7 ½" | ||
2 |
Perforated strip | 5 ½" | ||
2a |
Perforated strip | 4 ½" | ||
3 |
Perforated strip | 3 ½" | ||
4 |
Perforated strip | 3" | ||
5 |
Perforated strip | 2 ½" | ||
6 |
Perf strip (5 hole) | 2" | ||
6a |
Perforated strip | 1 ½" | ||
6n |
Perforated strip | 2" | ||
7 |
Angle girder | 24 ½" | ||
7a |
Angle girder | 18 ½" | ||
8 |
Angle girder | 12 ½" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
8a |
Angle girder | 9 ½" | ||
8b |
Angle girder | 7 ½" | ||
9 |
Angle girder | 5 ½" | ||
9a |
Angle girder | 4 ½" | ||
9b |
Angle girder | 3 ½" | ||
9c |
Angle girder | 3" | ||
9d |
Angle girder | 2 ½" | ||
9e |
Angle girder | 2" | ||
9f |
Angle girder | 1 ½" | ||
9l |
Angle girder | 1" | French Meccano | |
10 |
Fishplate | |||
11 |
Double bracket | ½" x ½" | ||
11a |
Double bracket | ½" x 1" | ||
11b |
Double bracket (Special) | 2 ½" x ½" x 1" | French Meccano | |
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
12 |
Angle bracket | ½" x ½" | ||
12a |
Angle bracket | 1" x 1" | ||
12b |
Angle bracket | 1" x ½" | ||
12c |
Obtuse angle bracket | |||
12d |
Obtuse angle bracket | 1" x ½" | French Meccano | |
13 |
Axle rod | 11 ½" | ||
13a |
Axle rod | 8" | ||
14. |
Axle rod | 6" | ||
14 |
Axle rod | 6 ½" | ||
14a |
Axle rod | 5 ½" | ||
15 |
Axle rod | 5" | ||
15a |
Axle rod | 4 ½" | ||
15b |
Axle rod | 4" | ||
16 |
Axle rod | 3 ½" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
16a |
Axle rod | 2 ½" | ||
16b |
Axle rod | 3" | ||
17 |
Axle rod | 2" | ||
18a |
Axle rod | 1 ½" | ||
18b |
Axle rod | 1" | ||
18c |
Axle rod | 1 ¼" | French Meccano | |
19 |
Crank handle | 3" and 4" | ||
19a |
Spoked wheel | |||
19b |
Pulley | 3" | ||
19c |
Pulley | 6" | ||
19d |
Pulley half 19C no boss | 6" | French Meccano | |
19g |
Crank handle with grip | 3 ½" | ||
19h. |
Crank handle | 5" | ||
19h |
Crank handle with grip | 5" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
19s |
Crank handle | 3 ½" | ||
20 |
Flanged wheel | 1 1/8" | ||
20a |
Pulley | 2" | ||
20b |
Flanged wheel | ¾" | ||
20c |
Pulley without boss | 2" | ||
21 |
Pulley | 1 ½" | ||
21p |
Pulley (plastic) | 1 ½" | French Meccano | |
21p/3p |
Pulley triangular hole plastic | 1 ½" | French Meccano | |
22 |
Pulley | 1" | ||
22a |
Pulley without boss | 1" | ||
22ap |
Pulley no boss plastic | 1" | French Meccano | |
22bp |
Pulley no boss slotted plastic | 1" | French Meccano | |
22c/3p |
Pulley triangular hole plastic | 1" | French Meccano | |
22cp |
Pulley holed plastic | 1" | French Meccano | |
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
22p |
Pulley (plastic) | 1" | French Meccano | |
23 |
Pulley without boss | ½" | ||
23a |
Pulley | ½" | ||
23ap |
Pulley no boss (plastic) | ½" | French Meccano | |
23b |
Pulley without boss | ½" | ||
23b/3p |
Pulley triangular hole plastic | ½" | French Meccano | |
23bp |
Pulley no boss (plastic) | ½" | French Meccano | |
23c |
Rubber pulley/collar | 3/8" | French Meccano | |
24 |
Bush wheel 8 hole | 1 3/8" | ||
24a. |
Wheel disc 8 hole | 1 ¼" | ||
24a |
Wheel disc 8 hole | 1 3/8" | ||
24b |
Bush wheel 6 hole | 1 3/8" | ||
24c |
Wheel disc 6 hole | 1 3/8" | ||
25 |
Pinion | 25Tx ¼" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
25a |
Pinion | 25T x ½" | ||
25b |
Pinion | 25T x ¾" | ||
25b/3p |
Pinion no boss triangular | 12T | French Meccano | |
mx25b |
Pinion | 25T x ¾" | ||
25c |
Pinion | 25T x 1/16" | French Meccano | |
25d/3p |
Pinion no boss triangular | 24T x ¾" | French Meccano | |
26 |
Pinion | 19T x ¼" | ||
26a |
Pinion | 19T x ½" | ||
26b |
Pinion | 19T x ¾" | ||
26c |
Pinion | 15T x ¼" | ||
26n |
Pinion | 11T x ¼" | French Meccano | |
26p |
Pinion (plastic) | 19T x ¼" | French Meccano | |
26p/3p |
Pinion triangular | 19T x ¼" | French Meccano | |
26r |
Pinion | 13T x ¼" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
27 |
Gear wheel | 50T 1 ¼" | ||
27a |
Gear wheel | 57T 1 ½" | ||
27ap |
Gear wheel (plastic) | 57T 1 ½" | French Meccano | |
27b |
Gear wheel | 133T 3 ½" | ||
27c |
Gear wheel | 95T 2 ½" | ||
27cp |
Gear wheel (plastic) | 95T 2 ½" | French Meccano | |
27d |
Gear wheel | 60T 1 5/8" | ||
27dp |
Gear wheel (plastic) | 60T 1 5/8" | French Meccano | |
27f |
Multi-purpose Gear wheel | |||
27p/3p |
Gear wheel triangular plas. | 57T 2 ½" | French Meccano | |
28 |
Contrate wheel | 50T 1 ½" | ||
28p |
Contrate gear (plastic) | 50T 1 ½" | French Meccano | |
28p/3p |
Contrate gear tri hole plast. | 50T 1 ½" | French Meccano | |
29 |
Contrate wheel | 25T ¾" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
30 |
Bevel gear | 26T 7/8" | ||
30a |
Bevel gear | 16T ½" | ||
30b |
Bevel gear | 24T | ||
30c |
Bevel gear | 48T 1 ½" | ||
31 |
Gear wheel | 38T 1" | ||
32 |
Worm gear | ½" | ||
32p |
Worm gear (plastic) | French Meccano | ||
33 |
Pawl (obsolete) | |||
33a |
Pivot bolt (=147b) | |||
34 |
Spanner | |||
34a |
Spanner/screwdriver | |||
34b |
Box spanner | |||
34c |
Spanner (hex) | |||
35 |
Spring clip | |||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
35p |
Spring clip (plastic) | French Meccano | ||
36 |
Screwdriver | |||
36a |
Screwdriver/wooden handle | |||
36b |
Screwdriver (plastic) | |||
36c |
Drift | |||
36d |
Small allen key | French Meccano | ||
37 |
Nut & bolt | |||
37a |
Nut | |||
37b |
Bolt | 7/32" | ||
37bh |
Allen bolt | ¼" | French Meccano | |
37c |
Nut (hex) | |||
37h |
Locknut square | French Meccano | ||
38 |
Washer | 3/8" | ||
38a |
Plastic spacer | French Meccano | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
38b |
Mini spacer (plastic) | French Meccano | ||
38d |
Washer | ¾" | ||
39 |
Cord (early - ball or card) | |||
40 |
Hank of cord | |||
40p |
Hank of cord (small) | |||
41 |
Propeller blade | |||
41b |
Ship's propeller (plastic) | French Meccano | ||
42 |
Chain (obsolete) | |||
43 |
Tension spring | |||
44 |
Bent strip stepped | |||
45 |
Double bent strip | |||
45a |
Bracket U double | French Meccano | ||
46 |
Double angle strip | 2 ½" x 1" | ||
46a |
Double angle strip | 1" x 1½" | French Meccano | |
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
47. |
Dynometer (combined) | |||
47 |
Double angle strip | 2 ½" x 1 ½" | ||
47a. |
Dynometer (tension) | |||
47a |
Double angle strip | 3" x 1 ½" | ||
47b |
Double angle strip | 3" x 1 ½" | French Meccano | |
48. |
Dynometer (compression) | |||
48 |
Double angle strip | 1 ½" x ½" | ||
48a |
Double angle strip | 2 ½" x ½" | ||
48b |
Double angle strip | 3 ½" x ½" | ||
48c |
Double angle strip | 4 ½" x ½" | ||
48d |
Double angle strip | 5 ½" x ½" | ||
48e |
Double angle strip special | 1" x ½" | French Meccano | |
49 |
Disc weight | 20 gm | ||
50. |
Large perforated stand | 9 ½" x 5 /2" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
50 |
Slide piece | |||
50a |
Eye piece | |||
50p |
Slide piece (plastic) | French Meccano | ||
51 |
Flanged plate | 2 ½" x 1 ½" | ||
51a |
Flanged plate | 1" x 1 ½" | French Meccano | |
51b |
Flanged plate | 1 ½" x 1 ½" | French Meccano | |
51c |
Flanged plate | 1" x ½" | French Meccano | |
51d |
Corner flanged plate | 1½" x 1" x 1½" | French Meccano | |
51e |
Semi-flanged plate | 1 ½" x 2 ½" | French Meccano | |
51f |
Flanged plate | 1 ½" x 2 ½" | French Meccano | |
51g |
Double obtuse flanged plate | 3" x 3" | French Meccano | |
52 |
Flanged plate | 5 ½"x 2 ½" | ||
p52 |
Aero collar (=59a) | |||
52a |
Flat plate | 5 ½" x 3 ½" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
53 |
Flanged plate | 3 ½" x 2 ½" | ||
53a |
Flat plate | 4 ½" x 2 ½" | ||
54 |
Flanged sector plate | 4 ½" | ||
55. |
Rubber bands | |||
55 |
Slotted strip | 5 ½" | ||
55a |
Slotted strip | 2" | ||
57 |
Hook plain | |||
57a |
Hook scientific | |||
57b. |
Loaded hook (large) | |||
57b |
Hook loaded (small) | |||
57c. |
Loaded hook (ball) | |||
57c |
Hook loaded (waisted) | |||
57d |
Wire hook | |||
58 |
Spring cord | |||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
58a |
Coupling screw for 58 | |||
58b |
Hook for 58 | |||
58d |
Hose (Black) | 22 ½" | French Meccano | |
58j |
Hose (Black) | 8 ½" | French Meccano | |
58l |
Hose (Black) | 5 ½" | French Meccano | |
58n |
Hose (Black) | 3" | French Meccano | |
58p |
Hose (Black) | 2 ¼" | French Meccano | |
59 |
Collar | |||
59a |
Aero collar (=p52) | |||
59b |
Mini plastic washer spacer | French Meccano | ||
60. |
Bent strip | 2 ½" | ||
61 |
Windmill sail | |||
62 |
Crank | |||
62a |
Threaded crank | |||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
62b |
Double arm crank | |||
63 |
Coupling | |||
63a |
Octagonal coupling | |||
63b. |
Octagonal strip coupling | |||
63b |
Strip coupling | |||
63c |
Threaded coupling | |||
63d |
Short coupling | |||
64. |
Ship's funnel (obsolete) | |||
64 |
Threaded boss | |||
64a |
Threaded boss 4 hole | French Meccano | ||
65 |
Centre fork | |||
66 |
Weight 50 grams | |||
67 |
Weight 25 grams | |||
68 |
Wood screw | |||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
69 |
Set screw | |||
69a |
Grub screw | 5/32" | ||
69b |
Grub screw long | 7/32" | ||
69c |
Grub screw short | 7/64" | ||
70 |
Flat plate | 5 ½" x 2 ½" | ||
71 |
Flat plate | 2 ½" x 3 ½" | ||
72 |
Flat plate | 2 ½" x 2 ½" | ||
73 |
Flat plate | 3" x 1 ½" | ||
73a |
Obtuse flat plate | 2½" x 1½" | French Meccano | |
74 |
Flat plate | 1 ½" x 1 ½" | ||
74a |
Flat plate | 2 ½" x 1 ½" | ||
76 |
Triangular plate | 2 ½" | ||
77 |
Triangular plate | 1" | ||
78 |
Screwed rod | 11 ½" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
78c |
Screwed rod | 9 ½" | French Meccano | |
79 |
Screwed rod | 8" | ||
79a |
Screwed rod | 6" | ||
80 |
Screwed rod | 5" | ||
80a |
Screwed rod | 3 ½" | ||
80b |
Screwed rod | 4 ½" | ||
80c |
Screwed rod | 3" | ||
81 |
Screwed rod | 2" | ||
81a |
Screwed rod | 1 ½" | ||
82 |
Screwed rod | 1" | ||
89 |
Curved strip | 5 ½" | ||
89a |
Curved strip stepped | 3" | ||
89b |
Curved strip stepped | 4" | ||
90 |
Curved strip | 2 ½" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
90a |
Curved strip stepped | 2 ½" | ||
94 |
Sprocket chain | |||
95 |
Sprocket wheel 36 teeth | 2" | ||
95a |
Sprocket wheel 28 teeth | 1 ½" | ||
95b |
Sprocket wheel 56 teeth | 3" | ||
96 |
Sprocket wheel 18 teeth | 1" | ||
96a |
Sprocket wheel 14 teeth | ¾" | ||
97 |
Braced girder | 3 ½" | ||
97a |
Braced girder | 3" | ||
98 |
Braced girder | 2 ½" | ||
99 |
Braced girder | 12 ½" | ||
99a |
Braced girder | 9 ½" | ||
99b |
Braced girder | 7 ½" | ||
100 |
Braced girder | 5 ½" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
100a |
Braced girder | 4 ½" | ||
101 |
Heald for loom | |||
102 |
Single bent strip | |||
103 |
Flat girder | 5 ½" | ||
103a |
Flat girder | 9 ½" | ||
103b |
Flat girder | 12 ½" | ||
103c |
Flat girder | 4 ½" | ||
103d |
Flat girder | 3 ½" | ||
103e |
Flat girder | 3" | ||
103f |
Flat girder | 2 ½" | ||
103g |
Flat girder | 2" | ||
103h |
Flat girder | 1 ½" | ||
103k |
Flat girder | 7 ½" | ||
103l |
Flat girder | 1" | French Meccano | |
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
103r |
Flat girder | 24 ½" | French Meccano | |
103t |
Flat girder | 18 ½" | French Meccano | |
104 |
Shuttle for loom | |||
105 |
Reed hook for loom | |||
106 |
Wood roller | |||
106a |
Sand roller | |||
107 |
Table for des. machine | |||
108 |
Corner gusset | |||
109 |
Face plate | 2 ½" | ||
109a |
Face plate without boss | 2 ½" | ||
110 |
Rack strip | 3 ½" | ||
110a |
Rack strip | 6 ½" | ||
110c |
Rack strip (plastic) | 6 ½" | French Meccano | |
111 |
Bolt | ¾" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
a111 |
Allen bolt | ¾" | French Meccano | |
d111 |
Bolt domehead | ¾" | French Meccano | |
111a |
Bolt | ½" | ||
a111a |
Allen bolt | ½" | French Meccano | |
c111a |
Bolt cheesehead | ½" | French Meccano | |
d111a |
Bolt domehead | ½" | French Meccano | |
111c |
Bolt | 3/8" | ||
a111c |
Allen bolt | 3/8" | French Meccano | |
d111c |
Bolt domehead | 3/8" | French Meccano | |
111d |
Bolt | 1 1/8" | ||
a111d |
Allen bolt | 1 1/8" | French Meccano | |
c111d |
Cheesehead bolt | 1 1/8" | French Meccano | |
d111d |
Bolt domehead | 1 1/8" | French Meccano | |
a111e |
Allen bolt | 1" | French Meccano | |
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
113 |
Girder frame | |||
114 |
Hinge | |||
115 |
Threaded pin | 5/8" | ||
115a |
Long threaded pin | 1 3/8" | ||
115c |
Long threaded pin with base | French Meccano | ||
116 |
Fork piece large | |||
116a |
Fork piece small | |||
117 |
Ball (=168d) | |||
118 |
Hub disc | |||
119 |
Channel segment | |||
120 |
Buffer | |||
120a |
Spring buffer | |||
120b |
Compression spring | |||
120c |
Heavy duty spring | French Meccano | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
120d |
Shock absorber (complete) | French Meccano | ||
120df |
Shock absorber female | French Meccano | ||
120dm |
Shock absorber male | French Meccano | ||
120dr |
Spring for shock absorber | French Meccano | ||
120e |
Small shock absorber | French Meccano | ||
121. |
Train coupling (early type) | |||
121 |
Train coupling | |||
122 |
Loaded sack | |||
123 |
Cone pulley | |||
124 |
Reverse angle bracket | 1" | ||
125 |
Reverse angle bracket | ½" | ||
126 |
Trunnion | |||
126a |
Flat trunnion | |||
127 |
Bell crank (simple) | |||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
128 |
Bell crank | |||
129 |
Rack segment | |||
130 |
Triple eccentric | |||
130a |
Single eccentric | |||
131. |
Dredger bucket | |||
131 |
Cam | |||
132 |
Flywheel | |||
133 |
Corner bracket | 1 ½" | ||
133a |
Corner bracket | 1" | ||
133b |
Obtuse corner bracket | French Meccano | ||
133c |
Obtuse corner bracket | 1 ½" x 1" | French Meccano | |
134 |
Crankshaft | |||
135 |
Theodolite protractor | |||
136 |
Handrail support | |||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
136a |
Handrail coupling | |||
137 |
Wheel flange | |||
138. |
Ship's funnel (obsolete) | |||
138 |
Ship's funnel | |||
139 |
Flanged bracket RH | |||
139a |
Flanged bracket LH | |||
140 |
Universal coupling | |||
140y |
4-hole collar | |||
140z |
Shouldered bolt | |||
141 |
Wire line | |||
142 |
Rubber ring | 3" | ||
142a |
Tyre | 2" | ||
142b |
Tyre | 3" | ||
142c |
Tyre | 1" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
142d |
Tyre | 1 ½" | ||
142e |
Tyre (cross-country) | 1" | French Meccano | |
142f |
Tyre (tractor) | 1" | French Meccano | |
142g |
Tyre (tractor) | ½" | French Meccano | |
142h |
Tyre (motor cycle) | 1 ½" | French Meccano | |
142j |
Tyre (aero) | ½" | French Meccano | |
142k |
Tyre (motor cycle) | 1" | French Meccano | |
142l |
Tyre (aero small) | 15 x 8mm | French Meccano | |
142m |
Tyre (kart large) | 17 x 14mm | French Meccano | |
142n |
Tyre (kart small) | 16 x 11mm | French Meccano | |
142p |
Tyre for 187b | French Meccano | ||
142r |
Tyre for 187c | French Meccano | ||
142z |
Tyre for 187c (larger) | French Meccano | ||
143 |
Circular girder | 5 ½" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
144 |
Dog clutch (pair) | |||
144a |
Dog clutch (male) | |||
144b |
Dog clutch (female) | |||
144c/3p |
Driving dog triangular hole | French Meccano | ||
145. |
Circular strip | 7" | ||
145 |
Circular strip | 7 ½" | ||
146 |
Circular plate | 6" | ||
146a |
Circular plate | 4" | ||
147 |
Pawl with pivot bolt | |||
147a |
Pawl | |||
147b |
Pivot bolt | |||
147c |
Pawl without boss | |||
147d |
Allen pivot bolt | 9/16" | French Meccano | |
147f |
Allen pivot bolt | ¾" | French Meccano | |
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
147g |
Allen pivot bolt | 15/16" | French Meccano | |
148 |
Ratchet wheel | |||
149 |
Loco collecting shoe | |||
150 |
Crane grab | |||
151 |
Pulley block single | |||
152 |
Pulley block double | |||
153 |
Pulley block triple | |||
154a |
Corner angle bracket RH | |||
154b |
Corner angle bracket LH | |||
155 |
Rubber ring | 1" | ||
156 |
Pointer | |||
157 |
Fan | |||
158a |
Signal arm (home) | |||
158b |
Signal arm (distant) | |||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
159 |
Circular saw | |||
160 |
Channel bearing | |||
160d |
Deep flanged plate | 5 ½ x 1 ½" | French Meccano | |
160g |
Gearbox casing | 1½"x1½"x1½" | French Meccano | |
161 |
Girder bracket | |||
162 |
Boiler complete | |||
162a |
Boiler end | |||
162b |
Boiler without ends | |||
162c |
Boiler without ends (open) | French Meccano | ||
163 |
Sleeve piece | |||
164 |
Chimney adaptor | |||
165 |
Swivel bearing | |||
166 |
End bearing | |||
167 |
Geared roller bearing | |||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
167a |
Large toothed quadrant | |||
167b |
Flanged ring | 9 7/8" | ||
167c |
Quadrant pinion | |||
168 |
Ball thrust bearing | |||
168a |
Ball race | |||
168b |
Ball race (toothed) | |||
168c |
Ball cage | |||
168d |
Ball | |||
169 |
Digger bucket | |||
170 |
Single eccentric (=130a) | |||
171 |
Socket coupling | |||
172 |
Pendulum connector | |||
173. |
Rail adaptors | |||
173a |
Screwed rod adaptor | |||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
173b |
Screwed rod adaptor G.S. | |||
174 |
Grease cup | |||
175 |
Flexible coupling unit | |||
176 |
Cord anchoring spring | |||
177 |
Shafting standard (large) | |||
177a |
Flexible seat (plastic) | French Meccano | ||
178 |
Shafting standard (small) | |||
179 |
Rod socket | |||
180 |
Gear ring | 133/95T | ||
181 |
Bobbin (301.) | |||
182 |
Insulating bush (=182) | |||
182a |
Insulating washer (=303.) | |||
183 |
Lamp holder (=310) | |||
184a |
Lamp | 2 ½ volt | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
184b |
Lamp | 3 ½ volt | ||
184c |
Lamp (=311.) | 6 volt | ||
184d |
Lamp | 10 volt | ||
184e |
Lamp | 20 volt | ||
184g |
Translucent pin | French Meccano | ||
185 |
Steering wheel | 1 ¾" | ||
185a |
Steering wheel | 2 ½" | ||
186 |
Drive band (light) | 2 ½" | ||
186a |
Drive band (light) | 6" | ||
186b |
Drive band (light) | 10" | ||
186c |
Drive band (heavy) | 10" | ||
186d |
Drive band (heavy) | 15" | ||
186e |
Drive band (heavy) | 20" | ||
186g |
Drive band (light/grey) | 3 ½" (89mm) | French Meccano | |
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
186h |
Drive band (light/yellow) | 6 ½" (165mm) | French Meccano | |
187 |
Road wheel | 2 ½" | ||
187a |
Conical disc | |||
187b |
Road wheel | 4 ½" | ||
187c |
3-part road wheel | |||
187f |
Road wheel small | |||
187g |
2-part road wheel | |||
187h |
Road wheel | 25 x 14mm | French Meccano | |
187j |
Road wheel | 28 x 15.9mm | French Meccano | |
187k |
Road wheel | 25 x 13.9mm | French Meccano | |
187l |
Road wheel | 28 x 15.9mm | French Meccano | |
187m |
Road wheel | 25 x 13.9mm | French Meccano | |
187n |
Road wheel | 25 x 15mm | French Meccano | |
187p |
Road wheel | 25 x 12mm | French Meccano | |
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
187q |
Wheel trim for 331n | French Meccano | ||
188 |
Flexible plate | 2 ½" x 1 ½" | ||
189 |
Flexible plate | 5 ½" x 1 ½" | ||
190 |
Flexible plate | 2 ½" x 2 ½" | ||
190a |
Flexible plate | 3 ½" x 2 ½" | ||
191 |
Flexible plate | 4 ½" x 2 ½" | ||
192 |
Flexible plate | 5 ½" x 2 ½" | ||
193. |
Strip plate | 2½" x 2½" | ||
193 |
Transparent plate | 2 ½" x 1 ½" | ||
193a |
Transparent plate | 2 ½"x 2 ½" | ||
193b |
Transparent plate | 3 ½" x 2 ½" | ||
193c |
Transparent plate | 4 ½" x 2 ½" | ||
193d |
Transparent plate | 5 ½" x 1 ½" | ||
193e |
Transparent plate | 5 ½" x 2 ½" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
194. |
Strip plate | 3½" x 2½" | ||
194 |
Plastic plate | 2 ½" x 1 ½" | ||
194a |
Plastic plate | 2 ½" x 2 ½" | ||
194b |
Plastic plate | 3 ½" x 2 ½" | ||
194c |
Plastic plate | 4 ½" x 2 ½" | ||
194d |
Plastic plate | 5 ½" x 1 ½" | ||
194e |
Plastic plate | 5 ½" x 2 ½" | ||
195. |
Strip plate | 5½" x 2½" | ||
195 |
Strip plate | 7 ½" x 2 ½" | ||
196 |
Strip plate | 9 ½" x 2 ½" | ||
197 |
Strip plate | 12 ½" x 2 ½" | ||
198 |
Hinged flat plate | |||
199 |
Curved plate U-section | 2 ½" x 2 ½" | ||
200 |
Curved plate | 2 ½" x 2 ½" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
200d |
Curved plate | 5 ½" x 1 ½" | French Meccano | |
201. |
Lamp with flex | |||
201 |
Flexible gusset plate | 2 ½" x 2 ½" | ||
202 |
Headlamp angle bracket | |||
203 |
Headlamp | |||
203a |
Headlamp rim | |||
203b |
Headlamp body | |||
204 |
Headlamp nut | |||
204c |
Cockpit canopy | French Meccano | ||
205 |
Headlamp glass | |||
206 |
Lamp shade | |||
207 |
Lamp base | |||
207a |
Stands with lamp and flex | |||
208 |
Battery tags and stud | |||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
208a |
Washers for battery stud | |||
210 |
Nuts for battery stud | |||
211a |
Helical gear | 14T | ||
211b |
Helical gear | 28T | ||
212 |
Rod & strip connector | |||
212a |
Rod & strip connector RA | |||
213 |
Rod connector | |||
213a |
3-way rod connector | |||
213b |
3-way rod con. with boss | |||
213c |
Flexible rod connector | French Meccano | ||
213d |
Rod connector short | French Meccano | ||
213dt |
Triple-flat rod connector | French Meccano | ||
213p |
Rod connector | French Meccano | ||
214 |
Semi-circular plate | 2 ½" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
215 |
Formed slotted strip | 3" | ||
216 |
Cylinder | 2 ½" x 1 ½" | ||
216a |
Cylinder (open) | French Meccano | ||
217a |
Wheel disc 8 hole (=24.) | 1 ¼" | ||
217b |
Disc (=38d) | ¾" | ||
219 |
Conical disc (=187a) | |||
220a |
Gun barrel | 5 ½" x 1" | ||
220b |
Gun barrel | 5 ½" x ¾" | ||
220c |
Gun barrel | 5 ½" x ½" | ||
221 |
Triangular flexible plate | 2 ½" x 1 ½" | ||
222 |
Triangular flexible plate | 2 ½" x 2" | ||
223 |
Triangular flexible plate | 2 ½" x 2 ½" | ||
224 |
Triangular flexible plate | 3 ½" x 1 ½" | ||
225 |
Triangular flexible plate | 3 ½" x 2" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
226 |
Triangular flexible plate | 3 ½" x 2 ½" | ||
230 |
Rod with keyway | |||
231 |
Key bolt | |||
235 |
Narrow strip | 2 ½" | ||
235a |
Narrow strip | 3" | ||
235b |
Narrow strip | 3 ½" | ||
235d |
Narrow strip | 4 ½" | ||
235f |
Narrow strip | 5 ½" | ||
235g |
Narrow strip | 1 ½" | ||
235h |
Narrow strip | 2" | French Meccano | |
236 |
Flanged plate | 2 ½" x 1" | French Meccano | |
236p |
Flanged box lid | 13 ½" x 4 ½" | ||
251 |
Pallet pin | |||
252 |
Pendulum rod | 9" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
253 |
Plastic dial | |||
254 |
Plastic disk clear | |||
257 |
Foam pad | |||
258 |
Clutch spring | |||
259 |
Wall hook with nail | |||
260 |
Sprocket chain (short) | 12" | ||
260a |
Suspension mounting bracket | French Meccano | ||
260b |
Suspension outer bracket | French Meccano | ||
260c |
Mini strip 5 hole | French Meccano | ||
260d |
Track rod end pin | French Meccano | ||
260e |
Stub axle mount | French Meccano | ||
260f |
Steering arm | French Meccano | ||
260g |
Track rod fork | French Meccano | ||
260h |
Steering wheel mountng brkt | French Meccano | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
260i |
Track rod end | French Meccano | ||
263 |
Numeral sheet | |||
264 |
Spiral fixed (self-adhesive) | |||
265 |
Spiral moving (self-adhesive) | |||
266 |
Hardened angle bracket | ½" x ½" | ||
267 |
Hank of nylon cord | |||
301. |
Bobbin (=181) | |||
302. |
Insulating bush (=182) | |||
303. |
Insulating washer (=182a) | |||
304. |
6 BA screw (=1575) | |||
305. |
6 BA square nut (=1583) | |||
306. |
Terminal (=1563) | |||
307. |
Contact screw | |||
308. |
Core or pole piece | |||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
309. |
Coil cheek | |||
310. |
Lamp holder (=183) | |||
311. |
Mini bulb 6V (=184c) | |||
312. |
27 SWG bare iron wire | 30" | ||
313. |
26 SWG SCC copper wire | 50 yards | ||
314. |
23 SWG SCC copper wire | 25 yards | ||
315. |
22 SWG bare copper wire | 4 yards | ||
315 |
Axle rod triangular section | 5" | French Meccano | |
315a |
Axle rod triangular section | 4 ½" | French Meccano | |
315b |
Axle rod triangular section | 4" | French Meccano | |
316 |
Axle rod triangular section | 3 ½" | French Meccano | |
316b |
Axle rod triangular section | 3" | French Meccano | |
317 |
Axle rod triangular section | 2" | French Meccano | |
318a |
Axle rod triangular section | 1 ½" | French Meccano | |
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
318c |
Axle rod triangular section | 1 ¼" | French Meccano | |
321 |
Steering wheel | ¾" | French Meccano | |
321a |
Rally steering wheel tri-hole | French Meccano | ||
324a |
Space cockpit | French Meccano | ||
331n |
Flexible racing tyre | French Meccano | ||
340 |
Lens large | French Meccano | ||
340a |
Lens small | French Meccano | ||
452 |
Tyre | ½" | ||
465 |
Fabric triangle | 7 ½" x 7 ½" | French Meccano | |
466 |
Handle for storage box | French Meccano | ||
501 |
Insulating strip | 5 ½" | ||
502 |
Insulating strip | 2 ½" | ||
503 |
Insulating strip | 1 ½" | ||
507 |
Insulating flat girder | 2 ½" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
508 |
Insulating flat girder | 1 ½" | ||
510 |
Insulating plate | 5 ½" x 2 ½" | ||
511 |
Insulating plate | 2 ½" x 2 ½" | ||
513 |
Insulating fishplate | |||
514 |
Insulating bush wheel 8 hole | 1 ½" | ||
516 |
Insulating bush wheel 6 hole | 1 ½" | ||
518 |
Bush wheel | 1" | ||
520 |
Rectangular coil | |||
522 |
Cylindrical coil | |||
525 |
Core holder for rect. coil | |||
526 |
Core for rectangular coil | |||
527 |
Core for cyl. coil - slotted | |||
528 |
Core for cylindrical coil | 1" | ||
529 |
Strip | 2" | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
530 |
Perforated strip | 2" | ||
531 |
Wiper arm flexible | 1" | ||
532 |
Wiper arm flexible | 1 ½" | ||
533 |
Wiper arm bent | 2" | ||
534 |
Slotted strip | 2" | ||
537 |
Permanent magnet | |||
537a |
Button magnet (Black) | French Meccano | ||
538 |
Magnet holder | |||
539 |
Lamp holder | |||
540c |
Lamp 12v 60 MA (clear) | |||
540j |
Lamp 12v 60 MA (yellow) | |||
540r |
Lamp 12v 60 MA (red) | |||
540v |
Lamp 12v 60 MA (green) | |||
542 |
Terminal nut | |||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
543 |
Contact screw | |||
544 |
Contact stud | |||
545 |
Pivot bolt | ½" | ||
548 |
Pivot rod | 3 ½" | ||
549 |
Pivot rod | 2" | ||
550 |
Short pivot | |||
551 |
Flat commutator | |||
554 |
Short circuit piece | |||
555 |
Rod with square end | 4" | ||
556 |
Reel of PVC sleeving | |||
557 |
Reel of bare copper wire | |||
558 |
Coil of connecting wire | |||
559 |
Coil of paper | |||
560 |
Dial card | |||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
561 |
Thin brass washer | |||
562 |
Bell | |||
563 |
Screwed rod | 2" | ||
564 |
Insulating spacer | |||
570 |
Oil | |||
600 |
M0 MkI Motor casing (2 part) | French Meccano | ||
600p |
2-Part casing for 601p | |||
601 |
M0 MkI Motor (6v) no case | French Meccano | ||
601p |
6 Volt motor | |||
602 |
Photo cell | |||
602p |
Tag for 601p | |||
603 |
Circuit board for MO MkI | French Meccano | ||
603p |
Printed circuit board | |||
604 |
Hood | |||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
605 |
Switch and base casing | French Meccano | ||
605p |
Switch and switch case | |||
606 |
Relay | |||
607 |
Battery holder | French Meccano | ||
607p |
Battery holder for 601p | |||
608 |
Pre-focus lamp 12v | |||
608p |
Twin connecting wire | |||
609 |
Contact clip for batteries | French Meccano | ||
609p |
Battery contact clip | |||
610 |
Lamp holder | |||
611 |
Miniature plug | |||
612 |
Miniature plug with screw | |||
613 |
Miniature plug socket | |||
613a |
Socket adaptor bolt | |||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
614 |
Cylindrical coil | |||
616 |
Connecting wire | 5 yards | ||
620 |
Remote control batt. box | |||
622 |
Screwdriver | |||
624 |
Battery box 3-volt | |||
625 |
Hollow plug | |||
630 |
Battery box 4-volt | |||
700 |
Electric Motor | French Meccano | ||
710 |
MO Mk II battery holders | French Meccano | ||
720 |
Battery box | French Meccano | ||
750 |
Motor & battery holder black | French Meccano | ||
750a |
Motor & battery holder white | French Meccano | ||
753 |
Bat hldr switch & searchlight | French Meccano | ||
758 |
Bat hldr switch & flashg light | French Meccano | ||
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
760 |
Gearbox for 770 | French Meccano | ||
761 |
Battery holder end plate | French Meccano | ||
770 |
Motor (triangular shaft) | French Meccano | ||
806b |
Narrow strip | 1" | French Meccano | |
811 |
Narrow double bracket | ½" x ½" | French Meccano | |
811a |
Narrow double bracket | 1" x ½" | French Meccano | |
812b |
Narrow RA bracket | 1" x ½" | French Meccano | |
812d |
Obtuse narrow strip | 1 ½" | French Meccano | |
825 |
Narrow r/RA bracket obt. | French Meccano | ||
825a |
Narrow r/RA bracket | French Meccano | ||
846a |
Double angle narrow strip | 1½" x 1" | French Meccano | |
913 |
Aerial | 80mm | French Meccano | |
927c |
Gear wheel (threaded boss) | 2 ½" | French Meccano | |
940 |
Plastic rod | 4mm x 120mm | French Meccano | |
| Meccano Ltd | ||||
|---|---|---|---|---|
| Part No | Description | Size | Notes | |
a1083 |
Drift (=36c) | |||
1563 |
Terminal (=306.) | |||
1570 |
Insulating washer (=303.) | |||
1575 |
6 BA screw (=304.) | |||
1583 |
6 BA square nut (=305.) | |||
2325 |
Power tool | French Meccano | ||